15
3.
Place compatible SATA HDD upon HDD
tray as showed above. Plug this side of
the cable to SATA power-in connector
and SATA connector of the hard disk.
4.
Turn over the HDD tray and fix 2.5
’’
HDD
upon HDD tray by tightening 4* screws
marked in corresponding spots.
5.
Fix 2.5
’’
HDD upon HDD tray by
tightening 2* screws marked in
corresponding spots.
6.
Tightening the other 2* screws on the
other side of the HDD tray.
7.
Plug SATA power connector and SATA
port connector into corresponding
connecters onboard.
8.
Adjust the installed tray as showed
above. Fix HDD tray into the system by
tightening up 4* screws marked.
