11
• Type in compressor brand and model. If air pressure can be shown as max 20 bars. If above 20 bars,
the report will show 20 bars.
• Note if you are using oil separator and aftercooler to your compressor and select that in the protocol.
• Have you performed a crash test you should mark 'Yes' in the protocol otherwise 'No'.
• If you will use the 'Safety shutdown' type the maximum pushing force you got from the crash test in 'Max.
pushing force'.
• If the 'Safety shutdown' must be active you should mark 'Yes' in the box (please read about safety
Shutdown in section 12).
• Information about the humidity and temperature will come automatically from the BluSensor.
• When all information is filled in the 'Start session box' turns green. Press on it and the system is ready to
use.
• Reset the meter counter on the machine.
• You can now start your cable installation and the system will document the job.
• When you are finished with your installation, press on 'End Session'.
• Note the meter marking from the cable and type this into the protocol under 'End'.
• Then you can choose to 'Delete session', 'Save and back' or 'Save and send'. Go to section 11 to see how
to do this.
D A R E T O D O I T D I F F E R E N T L Y .
