9
5. Set up tablet for crash test protocol
• You should always start with doing a crash test for that special cable and pipe you will be using
for the job.
• Start with pushing on 'Crash test protocol' and this menu appears:
• Fill out the items in the protocol (the yellow boxes must be filled in).
• Type in pipe, cable specifications for that cable and pipe you will do crash test.
• When all information is filled out the 'Start session box' turns green. Press on it to start.
• If software is asking for connection to 'SparkFun Pro Micro', press 'OK'.
• You can now start your crash test and the system will document the job.
• After you performed a success full crash test, where you have found the maximum pushing
force for the cable, tab on 'End Session'.
• You can now choose to 'Delete session', 'Save and go back' or 'Save and send'. Go to
section 11 for more information on how to do this.
D A R E T O D O I T D I F F E R E N T L Y .
