Jetter JM-204-480, User Manual, Page: 55 / 126

JetMove 204-480 7.3 Resolver Connection
Jetter AG 55
7.3 Resolver Connection
7.3.1 Specification
Specifications of the Mating Connector for X61
• 9-pin male SUB-D connector
• Metallized enclosure
Specification of Resolver Cable
• Cable size: 4 * 2 * 0.14 mm² (AWG 26(8))
• Cores have to be shielded and twisted in pairs and have to be included in an
overall shielding
• The shield must be connected to the connector housings on both ends of the
cable with the greatest possible surface area.
• Material: Copper
• Temperature class: 60 °C
• Max. cable length: 50 m
7.3.2 Resolver cable with mating connector
Mating connector of the resolver (solder side)
Fig. 12: View on the RC series mating connector of the resolver (internal
thread M23)
Note!
The resolver respectively HIPERFACE mating connector of the Jetter motor
series JL, JK and JH and can be ordered from Jetter AG by supplying the
following particulars:
Article no. 15100069 Resolver / HIPERFACE
The complete resolver cable between the servo amplifier series JetMove 2xx and
the Jetter motor series JL, JK, and JH can be ordered from Jetter AG. It can be
ordered by supplying the following cable confection number:
Cable confection no. 23 for the servo amplifier series JetMove 2xx
Solder
Side
12
9
11
5
7
8
6
4
10 2
1
3