Jetter JM-204-480, User Manual, Page: 49 / 126

JetMove 204-480 7.2 Motor Connection
Jetter AG 49
Cable Specification of the Motor Power Cable with
Mating Connector SC for JetMove 204-480
For connection without motor holding brake
Dimensions of the motor mating connector are specified in millimeters.
Motor Power Cable - Cable Confection No. 26.1
Field Wiring
Terminals of the
JetMove 204-480
Shielding Mating
Connector of
the Motor
(female, solder
side)
4 x 1.5 mm
2
(AWG
16(4))
Shielded,
highly
flexible
4-wire cable
with PE
(GND)
The wires are
equipped with wire end
ferrules.
Connect both sides of the shield with the greatest possible
surface area! Use metallized housing only!
Pin Wire
Number
Signal Pin
X62.U2 1 Phase 1 1
X62.V2 2 Phase 2 5
X62.W2 3 Phase 3 2
X62.PE (GND) yellow-green PE/GND grounding