9
c) A means of isolating the fire must be fitted upstream of the appliance to allow servicing etc to be
carried out. (If concealed fixing is required refer to the ‘Gas connection’ section in the ‘Installation
instructions’).
d) The gas supply must be made with rigid or semi-rigid pipe.
Unpacking
When unpacking refer to the check list below to ensure that all components are present before
commencing installation.
Do not unwrap the front or the coal beds until required to avoid accidental damage.
x
Firebox and burner
x
Fire front :- Either Horizontal Front, Regency Front, Open Front or Bauhaus Front.
x
Decorative Trim :- Either Black, Brass or Brushed Stainless Steel.
x
Coal beds comprising:
- Rear coal bed
- Front coal bed
- Left hand side coal support
- Right hand side coal support
x
Installation & Operating Instructions.
x
Poly Bag containing:
- 2 - Woodscrews
- 4 - Fibre rawlplugs
- 4 - Eye bolts
- 1 - Wire fixing kit
- 1 - Sealing Tape
- 4 - Magnets (For Decorative Trim)
x
Remote Control Version Only
- Remote Handset
- Battery PP3, 9 volts sealed long life
Alkaline
- Battery Pack 2xD, 7.2 volts sealed long life
Lithium
- Double Sided Tape
- P Clip
-Self Tapping Screw
x
Comfort Control Version Only
- Comfort Control unit with 5 metres of cable
Installation instructions
Preparing the Appliance
(See Fig. 6)
Carefully remove the loose coal pack, side coal supports, front coal bed and rear coal bed.
Slacken and remove the 2 nuts securing the burner to the fire box. Then, lift the burner tray out of
the fire box and place to one side. The nuts are required and should be kept safe for re-assembly.
- Pack of loose coals
- Fire size
16”
18”
- Coal Quantity
17
19
Summary of Contents for MK6
Page 6: ...7 Fig 1 Fig 2 ...
