21
Users instructions
IF A GAS LEAK IS FOUND OR SUSPECTED TURN OFF THE GAS SUPPLY AT THE METER
AND CONTACT YOUR INSTALLER OR GAS EMERGENCY SERVICE.
WARNING - NEVER HANG CLOTHES OR OTHER ITEMS OVER THE APPLIANCE.
General
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE
REFERENCE.
x
This fire is intended for decorative purposes. The installation must be in accordance with National
Regulations and must be carried out by a qualified installer.
x
DO NOT
throw paper, rubbish etc. upon the coals. Debris from any source or soot formed should
be removed.
x
The fire is suitable for hearth installation only. The hearth should be either non-combustible or a
purpose made proprietary hearth with a temperature rating of 150°C. The height of the hearth
should be at least 50mm above floor level, and at least 12mm thick.
x
The fire surround should be flat around the sealing area of the fire. The hearth and fireplace
opening must be flat and at the same level.
x
If the fire is to be installed to a chimney previously used to burn solid fuel, the chimney should be
swept before the appliance is installed.
x
The use of blown vinyl or similar soft embossed wall coverings directly above the fire may lead to
them being discoloured or scorched. Please bear this in mind when installing or decorating.
x
Always turn the fire OFF and allow to cool before touching any parts except for the controls. Note
that the coal bed will remain hot for a considerable length of time.
x
Due to the newness of materials, the fire may give off a slight smell for a period after initial
lighting. This is quite normal and any odours will disperse after a few hours use.
x
The coal bed may change colour after a time, and small cracks may appear in the base coals or
the loose coals. This does not affect the operation of the fire and is normal.
x
As with any fire, certain components will become hot in use, e.g. the decorative fire front. Care
should be taken when using the control of the appliance when it is hot.
x
This fire has the additional safety feature of an oxygen depletion sensor pilot (ODS pilot) which
turns OFF the gas supply if there is a build up of combustion products in the room. If the fire shuts
itself off, do not use the fire and have the flue checked by a qualified person. The ODS is not a
substitute for an independently fitted carbon monoxide detector.
Safety information
IMPORTANT:
A suitable Fireguard conforming to National Regulations should be used with this
appliance to protect children, the elderly or infirm. Care should also be taken with pets.
In your own interest and that of safety, all gas appliances must be installed by competent persons.
Installation must be in accordance with National Regulations. CORGI registered installers are
required to work to recognised standards.
The chimney should be checked regularly to ensure correct evacuation of the flue products.
Any purpose-provided ventilation should be checked regularly to ensure that it is free from
obstruction. This fire should be serviced regularly by a qualified person.
Summary of Contents for MK6
Page 6: ...7 Fig 1 Fig 2 ...
