![background image](http://html1.mh-extra.com/html/jetcat/p60/p60_instruction-manual_3808964051.webp)
Limits Menu, continued
Aux-ch Smoker
Ctrl
Remark
Function
Test Function
DISABLED
Smoker Valve not
used, always closed
---
Open if AuxSw=0
Smoker Valve is
opened if:
(Turbine is running)
Valve opens if AUX
is set to the OFF
position
AUX-Channel
Option must be set
to Enabled, Turbine
control off.
The function of
smoker valve can
be tested with the
smoker valve
selection in the Test
Function menu.
Open if AuxSw=2
Smoker Valve is
opened if:
(Turbine is running)
Valve opens is
AUX is set to Auto-
Off position
AUX-Channel
Option must be set
to Enabled, Turbine
control off
The function of
smoker valve can
be tested with the
smoker valve
selection in the Test
Function menu.
Limits Menu, continued
Value
Explanation
Smoker WarnFunct
When this function is assigned a condition value and the
suggested smoke system in the manual is implemented, the
smoke valve is pulsed on for 0.2 seconds and off for 0.4 seconds
if that condition occurs. This function can be very useful in
determining several dangerous situations and giving the pilot a
visual warning. This function is especially useful for the helicopter
pilot that cannot have the throttle change automatically for these
warnings. These are the possible settings for this function:
DISABLE,
no function
BATTERY LOW,
if the ECU battery is getting weak.
FUEL LOW,
if the fuel level reaches the pre-programmed
LowFuel Limit
.
BATTor FUEL LOW,
if any of these conditions exist.
BATT, FUEL, FAILS,
if any of these conditions exist.
FAIL-SAFE,
if the ECU is detecting a failsafe condition.
Note:
If the throttle is at idle, the smoke warning is temporarily
disabled.
GPS-Receiver
Enables or disables the GPS menu for the optional GPS receiver.
Disabled, Enabled COM1 or Enabled COM2
Default = Disabled
AirSpeed units
Set airspeed and distance display in km/h or mph.
StartUp Mode
This function allows for different engine start procedures for multi
Page 51/74