12
Adjustments
When changing tools, making
adjustments, or doing clean-up and maint-
enance, always turn the machine off and
unplug the machine from its power source.
Fence Assembly Movement
The adjustment controls of the fence assembly are
as follows (refer to Figure 2):
A – Fence Assembly Lock Knob – to secure fence
assembly to table
B – Lock Knob – to secure the outfeed fence
C – Outfeed Ram Adjust – fine forward/backward
adjustment for outfeed fence
D – Lock Knob – loosening permits side to side
adjustment of infeed or outfeed fence
E – Lock Knob – loosening permits vertical
adjustment of guard (F)
G – Lock Knob – loosening permits
backward/forward adjustment of guard (F)
Handwheel
The handwheel
controls the spindle height. To
adjust (refer to Figure 3:
1. Loosen
the
lock handle
(A).
2. Turn
the
handwheel
(B) clockwise to lower the
spindle
(C) and counterclockwise to raise the
spindle.
A
scale
and
indicator
(E) displays the spindle
position and can be used for reference when
making relative spindle height adjustments.
3. Tighten
the
lock handle
(A).
Figure 2
Figure 3
