7
Introduction
This manual is provided by JET covering the safe operation and maintenance procedures for a JET
Model JWS-25X Shaper. This manual contains instructions on installation, safety precautions, general
operating procedures, maintenance instructions and parts breakdown. This machine has been designed
and constructed to provide consistent, long-term operation if used in accordance with instructions set
forth in this manual. If there are any questions or comments, please contact either your local supplier or
JET. JET can also be reached at our web site: www.jettools.com.
Specifications
Model Number .................................................................................................................................. JWS-25X
Stock Number ..................................................................................................................................... 708309
Motor .................................................................................................................... 3HP, 230V, 60Hz, 1 Phase
Table Size (L x W) ...................................................................................................................... 25-1/2" x 25"
Table Height from Floor ............................................................................................................................. 33"
Spindle Size (Standard) .................................................................................................... 1/2", 3/4" Standard
Router Bit Collet Size (Optional) .......................................................................................................1/4", 1/2"
Spindle Capacity Under Nut:
Provided
spindles
..............................................................
(1/2" Spindle) 2-13/64", (3/4" Spindle) 3-3/16"
Optional spindles ............................................................... (1” Spindle) 3-3/16”, (30mm Spindle) 2-15/32”
Spindle Travel ........................................................................................................................................ 3-1/2"
Spindle Speeds (RPM) ............................................................................................... 7500, 10000, reversing
Table T-Slot (W x T) ........................................................................................................................ 3/4" x 3/8"
Table Opening Diameter ...................................................................................................................... 6-9/32"
Insert Opening Diameters .................................................................................................... 2-9/16", 4-21/64"
Fence Size x 2 ............................................................................................................ 4-3/4" (H) x 14-1/2" (L)
Dust Collection Minimum CFM Required 4" Port ...................................................................................... 600
Overall Dimensions .............................................................................32-1/4" (L) x 28-1/4" (W) x 42-3/8" (H)
Weight ......................................................................................................... 381 lbs (Shipping), 331 lbs (Net)
Optional Accessories
708383
1/4" Router Collet
708384
1/2" Router Collet
708388
1/2" Spindle
708387
3/4" Spindle
708318
1" Spindle
708382
30mm Spindle
The specifications in this manual were current at the time of publication, but because of our policy of
continuous improvement, JET reserves the right to change specifications at any time and without prior
notice, without incurring obligations.
