Jet Central Rabbit, Operation And Maintenance Manual

Page: 41 / 44

January, 2009 40
I.C.S. SHUTDOWN CODES
The I.C.S. will always show you the reason of the last shut down. It will also give you a code
and the engine parameters so you know why it has happened. Here are the codes and what
they refer so it’s important that in an unwanted shut down, note the given parameters and
codes to see what has happened before restarting the turbine. These codes will be reset.

USER OFF The I.C.S. has received the shut down command from the receiver

RX PWR The I.C.S. lost power from the receiver

FAILSAFE The I.C.S. received the failsafe command from the receiver

FLAME OUT The I.C.S. lost the temperature reading from the thermocouple

SPEEDLOW The I.C.S. has shut the turbine down due to the fact the RPM has fallen
below a certain RPM

AUTOMODE The I.C.S. has received a start command after initiated an auto start
IMPORTANT PARAMETERS - In each of the above codes also these important parameters
will be displayed:

TEMPERATURE

RPM

PUMP POWER
The I.C.S. stores at last 10 min run time parameters to help in diagnosing any issues.