Jet Central Rabbit, Operation And Maintenance Manual

Page: 22 / 44

January, 2009 21
4.7 Info Submenu
When you choose this option, the first screen will
showthe timers.
“Tot” – The total time in minutes that your turbine has
run
“Last”- The time in seconds of your last run
“Cy” – The number of cycles (start, run, off) your turbine
has
The second option is “Battery used”
Counts the mAh used from the battery. User can
set to zero at first flight of the day, and check after
each fligth to know approximately the remaining
power of the battery.
NOTE: The circuit that measures the amperage in the ECU is not a precision circuit, it was
added to protect the ECU from overloads. Measured values can have an error of 10%.
Counter of bad RC pulses and total time duration
of bad signal.