18 | BA-40400-02-V14
Two-Channel Controller TOPAX DE
4.11.6 Menu 0.4.2: Output Disinfection
With the arrow keys
▲
and
▼
you can select between the options:
• Servomotor with potentiometer
• Servomotor without potentiometer
• Pulse frequency (Optocoupler)
• Pulse frequency (relay)
• Pulse length (relay)
• Continuous control output (20 mA)
• ON/OFF (relay)
• No controller function
The selected option is highlighted in grey. The entry is confirmed with
the "OK", "Next" key or
▶
. The TOPAX then goes to the next menu.
The key "back" or
◀
leads to the previous menu.
4.11.7 Menu 0.4.3: pH output
With the arrow keys
▲
and
▼
you can select between the options:
• Servomotor with potentiometer
• Servomotor without potentiometer
• Pulse frequency (Optocoupler)
• Pulse frequency (relay)
• Pulse length (relay)
• Continuous output (20 mA)
• 2-sides pulse frequency (relay) (Optocoupler)
• 2-sides pulse frequency (relay) (Relay)
• 2-sides pulse length (relay)
• ON/OFF (relay)
• No controller function
The selected option is highlighted in grey. The entry is confirmed with
the "OK", "Next" key or
▶
. The TOPAX then goes to the next menu.
The key "back" or
◀
leads to the previous menu.
4.11.8 Menu 0.4.5: Input temperature
With the arrow keys
▲
and
▼
you can select between the options:
• ON
• OFF
The selected option is highlighted in grey. The entry is confirmed with
the "OK", "Next" key or
▶
. The TOPAX then goes to the next menu.
The key "back" or
◀
leads to the previous menu.
4.11.9 Menu 0.4.13: Input disturbance variable (optionally avail-
able)
With the arrow keys
▲
and
▼
you can select between the options:
• 0...20mA
• 4...20 mA
• OFF
The selected option is highlighted in grey.
To go back to the previous menu, press the key "back" or
◀
.
4.11.10 Menu 0.5: Completing the configuration
The TOPAX moves immediately on to the configuration, at the latest after
menu 0.4.13, in the finalising menu (menu 0.5) and shows the chosen
configuration with all the previously chosen options in the total overview.
The configuration is saved with the “save” key and the finalising confir-
mation key “OK” and the TOPAX moves to the next menu 0.6.1.
The configuration starts from the beginning again with the key “back”.
The TOPAX then goes to menu 0.4.1.
4.11.11 Menu 0.6: Terminal connection clips
According to the chosen Options the TOPAX determines the relevant
terminal connections and shows this in menus 0.6.1 to 0.6.4 (each by
number of connections).
Disinfektion
input clamps analog
Next
check clamps and setup
pH value
Temperature
new configuration
51A - 52A
53 - 54
57 - 58
0.6.1
connect only with
main voltage off
Fig.13: Menu 0.6.1. - Example of a new configuration and the relevant terminal
connection plan. A changed configuration will be displayed red.
NOTICE!
Make a note of the given connections on the pre-
print in chapter “16 terminal connection diagram for
own configurations” on page 39..
In order to move between the individual menus 0.6.1 to 0.6.4, press
either the "next” or the “back” key, or the arrow keys
▲
and
▼
.
To finalise the total configuration confirm the connection plan with the
“OK” key. After confirming the configuration the TOPAX restarts and
switches to the standard display.
More information about the TOPAX menu structure are given in chapter
“12 Menu configuration and main settings” on page 29.
mg/l
Disinfection
pH value
7.04
0.39
°C
temperature
26.3
Fig.14: Standard display with the measuring values.
