Section I: Safety
Page 8
5-376-000086
REV. 4 - 07/10
SAFETY CHAINS MUST BE USED WHEN TOWING
AND TRANSPORTING
Safety chains are provided for use with your new Jerr-Dan Recovery Vehicle.
Periodically inspect all chains for any signs of fatigue or damage. Don’t
overlook the hooks; be sure they have not been bent or deformed. If chain or
hook damage is noted, they must be replaced before being used.
Do not
use safety chains for recovery operations.
Many states require that the towed vehicle be secured to the wrecker body
with safety chains. Check your local regulations and use your safety chains.
Safety chains are provided for use with your new JERR-DAN.
•
Never attach the chain hooks in such a
way as to damage brake lines or other
functional parts.
•
Keep in mind that driving over bumps and
hollows and around corners will tend to
tighten or loosen the chains.
•
Check that the chain does not become over
tensioned when raising the towed vehicle to the
towing position or during the towing operation.
•
Always use two safety chains when towing all
vehicles, regardless of distance.
Summary of Contents for MPL40
Page 2: ...5 376 000086 REV 4 07 10 ...
Page 8: ...5 376 000086 REV 4 07 10 Page iv THIS PAGE INTENTIONALLY LEFT BLANK ...
Page 26: ...Section I Safety Page 18 5 376 000086 REV 4 07 10 THIS PAGE INTENTIONALLY LEFT BLANK ...
Page 80: ...Section II Operation Page 72 5 376 000086 REV 4 07 10 THIS PAGE INTENTIONALLY LEFT BLANK ...
