Section II: Operation
Page 63
5-376-000086
REV. 4 - 07/10
15. Tie the front of the motorcycle to
the rear of the wrecker body.
Attach the lasso style straps to
each of the handle bars.
16. Place the hook on one end of the
“front” strap to the loop of the
lasso strap on the handle bars
and place the hook on the other
end to the rear of the wrecker
body and tighten with the ratchet.
Repeat for the other side.
17. Use the wheel lift safety chains
to prevent the wheel grid from
pivoting during travel. Loop the
end of the safety chain around the
grid and secure with the grab
hook. Remove the slack in the
chain and secure the chain in the
keyslot of the chain box.
Summary of Contents for MPL40
Page 2: ...5 376 000086 REV 4 07 10 ...
Page 8: ...5 376 000086 REV 4 07 10 Page iv THIS PAGE INTENTIONALLY LEFT BLANK ...
Page 26: ...Section I Safety Page 18 5 376 000086 REV 4 07 10 THIS PAGE INTENTIONALLY LEFT BLANK ...
Page 80: ...Section II Operation Page 72 5 376 000086 REV 4 07 10 THIS PAGE INTENTIONALLY LEFT BLANK ...
