Section I: Safety
Page 11
5-376-000086
REV. 4 - 07/10
•
Never lift or pull over or around a sharp obstacle.
•
Never completely unwind wire rope from a
winch while loaded. Always be sure that a
minimum of five (5) wraps of wire rope are on
the drum at all times.
•
Never tie down the front end of your wrecker
for recovery work of heavy lifts. You will
likely damage the truck frame if you do.
•
Never allow the wire rope to cross wrap
(criss-cross) on the winch drum. Crushing
of the wire rope can cause wire rope failure.
•
Never make a lift or pull with the wire rope
attached to light gauge or sheet metal parts;
use the frame or major structural members.
•
Don’t disengage the winch drum clutch while
the wire rope is loaded.
Summary of Contents for MPL40
Page 2: ...5 376 000086 REV 4 07 10 ...
Page 8: ...5 376 000086 REV 4 07 10 Page iv THIS PAGE INTENTIONALLY LEFT BLANK ...
Page 26: ...Section I Safety Page 18 5 376 000086 REV 4 07 10 THIS PAGE INTENTIONALLY LEFT BLANK ...
Page 80: ...Section II Operation Page 72 5 376 000086 REV 4 07 10 THIS PAGE INTENTIONALLY LEFT BLANK ...
