12
Your iPod / iPhone is locked
up.
Please make sure that your iPod /
iPhone is working properly before
docking into the unit. Please refer to
your iPod / iPhone manual for
details.
iPod / iPhone is not installed
properly.
Remove your iPod / iPhone from the
dock and check for obstruction on
the connectors in the dock and on
your iPod. Then carefully reseat it in
the dock.
iPod / iPhone does
not charge up
iPod / iPhone is locked up or
frozen.
iPod / iPhone battery has
problem.
Please make sure your iPod /
iPhone is working properly before
docking into the unit. Please refer to
your iPod / iPhone manual for
details.
Noise or sound
distorted on FM
broadcast
Station not tuned properly for
FM.
Retune the FM broadcast station.
Slightly rotate or reposition the
unit.
You have tuned to a mono
station or the station is too
weak.
Select another FM station or extend
or rotate the wire antenna for best
reception.
FM ST does not
appear in the
display
FM MONO MODE is set.
Press the ST button to switch to
STEREO.
Volume level is set too high.
Decrease the volume.
If the iPod / iPhone original sound
source is of poor quality, distortion
and noise are easily noticed with
high-power speakers. Try a different
audio source such as a music CD.
Sound is distorted
Sound source is distorted.
If you are using an external sound
source like older generation of iPod,
try reducing the output volume on
the device itself. Also try turning
bass boost OFF or change the EQ
setting.
Unit gets warm after
extended play at
high volume
This is normal.
Turn the unit off for a period of time
or lower volume.
