9
external amplifier:
1. Use a RCA audio cable (not included) to connect the SUBWOOFER INPUT of your
external amplifier to the SUBWOOFER OUTPUT jack on the rear of the unit.
2. Power on the unit and the external amplifier.
3. When audio is played on this unit, the sound will be produced from the unit and the
connected external amplifier synchronously for enhancing the bass sound effect.
DIMMER (Remote Control Only)
Press the DIMMER button to adjust the LCD backlight intensity from High/Low to obtain
the best clarity of LCD Panel readout.
SLEEP TIMER OPERATIONS (Remote Control Only)
1. In Radio, iPod or AUX mode, press the SLEEP button once, then the “SLEEP”
indicator will appear on the LCD display.
2. Tap the SLEEP button repeatedly to select the desired sleep time. The sleep timer
can be chosen from 10 - 90 minutes in 10 minute step in below sequence.
90
⎝
80
⎝
70
⎝
60
⎝
50
⎝
40
⎝
30
⎝
20
⎝
10
⎝
off
3. After sleep timer selected, wait for 3 seconds to confirm. The “SLEEP” indicator
continues to appear on the LCD. The unit will stop and go into Standby mode
automatically after selected sleep time has expired.
4. To check remained sleep time, simply press the SLEEP button.
5. Press the
POWER button once to switch off the unit before the selected sleep
time expires.
NOTE:
If you press the SLEEP button once and the “SLEEP “ indicator appears on the LCD
display, the unit will go into Standby mode automatically after selected time has
expired.
If you are falling asleep to music from an external device connected to AUX input,
the sleep timer will shut off the power to this unit but it will not turn off power to the
external device.
MUTE (Remote Control Only)
- Press the
MUTE
button on remote control to mute the sound output from speaker
temporarily, “MUTE” message will appear on display and flashing.
- Press the
MUTE
button again to resume to normal speaker playback.
