-
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel- cadmium)
batteries.
-
Only batteries of the same or equivalent type as recommend are to be used.
-
If the unit is not to be used for an extended period of time, remove the batteries. Any
old or leaking battery can cause damage to the unit and may void the warranty.
-
Do not dispose of batteries in fire, battery may explode or leak.
-
Do not try to recharge a battery that is not intended to be recharged; the battery can
overheat, rupture and leak (Follow the battery manufacturer’s directions).
AC-DC Adaptor Connection
An AC-DC Adaptor with the output
5V
1500mA
(Included) is required for
operating the main unit. To connect the AC-DC Adaptor to the unit and 120V~ 60Hz
AC Outlet:
1. Firmly and securely insert the DC plug of the adaptor into the
DC IN Jack
on the
back of the unit.
2. Plug the adaptor’s AC plugs into a power outlet rated at 120V~ 60Hz.
NOTE:
This unit is not magnetically shielded and may cause color distortion on the
screen of some TVs or video monitors. To avoid this, you may need to move
the unit further away from the TV or monitor if unnatural color shifts or image
distortion occurs.
TURNING THE UNIT POWER ON/OFF
1. In Standby mode, tap the
Power On/ Standby
Button
to turn the unit ON. The
last selected input mode icon will show on LCD display.
2. To turn the unit OFF, press on hold the
Power On/ Standby
Button
for 1 to 2
seconds in Power On mode to turn the unit OFF. The “OFF” will show on LCD
display before the unit go to Standby mode.
CLOCK SETTING
After plugging in the AC adaptor, “12:00” will appear and start blinking on the LCD
display.
1. In Standby mode, press and hold the
Time Set / Memory Button
of the unit,
“12 Hr”
will blink.
2. Tap the
or
button to set the unit to the 24-hour mode or 12-hour mode.
3. Press the
Time Set / Memory Button
then the hour digits will blink.
4. Tap the
or
button to adjust the hour. Press and hold the button for fast
advance / reverse setting.
Note:
Make sure the hour is set so that the
PM
indicator is displayed correctly.
5. Press the
Time Set / Memory Button
to confirm the hour setting, the minute digits
AC ADAPTOR
E-5
will flash to prompt for input.
6. Tap the
or
button to adjust the minute. Press and hold the button for fast
advance / reverse setting.
7. Press the
Time Set / Memory Button
again to complete the setting.
