Jeep WRANGLER 2017, User Manual

Page: 229 / 292

NOTE:
• Your radio may not be equipped with the
Uconnect Voice Command and Uconnect
Phone features. To determine if your radio
has these features, push the Voice Com-
mand button on the radio. You will hear a
voice prompt if you have the feature, or see
a message on the radio stating “Uconnect
Phone not available” if you do not.
• Your radio has many features that add to
the comfort and convenience of you and
your passengers. Some of these radio fea-
tures should not be used when driving
because they take your eyes from the road
or your attention from driving.
Clock Setting
1. Turn the radio on, then press the screen
where the time is displayed.
2. Press the “User Clock” button on the
touchscreen or the time display (Naviga-
tion radio only).
3. To adjust the hours, press either the “Hour
Forward” or “Hour Backward” button on
the touchscreen.
4. To adjust the minutes, press either the
“Minute Forward” or “Minute Backward”
button on the touchscreen.
5. To save the new time setting, press the
screen where the word “Save” is
displayed.
Menu
• Push the MENU button on the faceplate to
access the System Setup menu and the
My Files menu.
• Push the MENU button on the faceplate in
an active mode (FM, CD, AUX, etc.) to
change mode specific settings.
Equalizer, Balance And Fade
Audio Control Menu
1. Push the AUDIO button on the faceplate
on the right side of the radio.
2. Use either the arrow buttons or the cross-
hair on the screen to change Balance and
Fade. The “CENTER” button on the
touchscreen resets the settings.
3. Press the “Equaliser” button on the
touchscreen and use either the arrow but-
tons or the sliders on the screen to adjust
BASS, MID, and/or TREBLE.
Balance/Fade Menu
227