Jeep WRANGLER 2017, User Manual

Page: 115 / 292

WARNING!
• Improper installation can lead to failure
of an infant or child restraint. It could
come loose in a collision. The child
could be badly injured or killed. Follow
the child restraint manufacturer’s direc-
tions exactly when installing an infant or
child restraint.
• After a child restraint is installed in the
vehicle, do not move the vehicle seat
forward or rearward because it can
loosen the child restraint attachments.
Remove the child restraint before ad-
justing the vehicle seat position. When
the vehicle seat has been adjusted, re-
install the child restraint.
• When your child restraint is not in use,
secure it in the vehicle with the seat belt
or ISOFIX anchorages, or remove it from
the vehicle. Do not leave it loose in the
vehicle. In a sudden stop or accident, it
could strike the occupants or seatbacks
and cause serious personal injury.
Suitability of Passenger Seats for Universal
Child Restraint System Use
According to the European Directive 2000/3/
EC, the suitability of each passenger seat
position for the installation of Universal Child
Restraint Systems is shown in the following
table:
2 Door Seating Position
Mass Group
Universal Child Seating
Position Table
Front
Passenger
Rear
Outboard
0 - Up to
10 kg X U
0+ - Up to
13 kg X U
I - 9 to 18 kg X U
II - 15 to
25 kg X U
III - 22 to
36 kg X U
4 Door Seating Position
Mass
Group
Universal Child Seating
Position Table
Front
Passenger
Rear
Outboard
Rear
Center
0 - Up to
10 kg X U U
0+ - Up
to 13 kg X U U
I - 9 to
18 kg X U U
II - 15 to
25 kg X U U
III - 22 to
36 kg X U U
Key of letters used in the table above:
• U = Suitable for “universal” category re-
straints approved for use in this mass
group.
• X = Seat position not suitable for children
in this mass group.
113