Jeep Wrangler 1997, Manual

Page: 979 / 1152

Check the condition of the reverse idler gear bush-
ing (Fig. 129). Replace the gear if the bushing is
damaged or worn.
SPECIFICATIONS
TORQUE
DESCRIPTION TORQUE
Plugs, Access . . . . . . . . . . . . . . . . .19 N·m (14 ft.lbs.)
Bolts, Adapter Housing . . . . . . . . .34 N·m (25 ft.lbs.)
Switch, Back-up Light. . . . . . . . .44 N·m (32.5 ft.lbs.)
Plugs, Drain and Fill . . . . . . . . .44 N·m (32.5 ft.lbs.)
Bolts, Front Bearing Retainer . . . .17 N·m (12 ft.lbs.)
Plugs, Interlock and Detent . . . . . .19 N·m (14 ft.lbs.)
Screws, Propeller
Shaft Clamp . . . . . . . .16–23 N·m (140–200 in.lbs.)
Bolts, Rear Mount to
Transmission . . . . . . . . .33–60 N·m (24–44 ft.lbs.)
Nut, Rear Mount Clevis . . .54–75 N·m (40–55 ft.lbs.)
Nuts, Rear Mount to
Crossmember . . . . . . . . .33–49 N·m (24–36 ft.lbs.)
Pins, Restrictor . . . . . . . . . . . . . .27.4 N·m (20 ft.lbs.)
Bolts, Reverse Shift Arm
Bracket . . . . . . . . . . . . . . . . . . .18 N·m (13 ft.lbs.)
Screw, Shift Arm Set . . . . . . . . . . .38 N·m (28 ft.lbs.)
Screws, Shift Fork Set . . . . . . . . . .20 N·m (15 ft.lbs.)
Nut, Shift Knob . . . . . . . . .20–34 N·m (15–25 ft.lbs.)
Screws, Shifter Floor
Cover . . . . . . . . . . . . . . . . .2–3 N·m (17–30 in.lbs.)
Bolts, Shift Tower . . . . . . . . . . . . .18 N·m (13 ft.lbs.)
Nuts, Transfer Case Mounting. . . .30–41 N·m (22–30
ft.lbs.)
SPECIAL TOOLS
AX15
Fig. 129 Reverse Idler Gear Bushing
C-3339 Dial Indicator Set
C-4171 Handle, Universal Tool
8209 Installer, Seal
8212 Installer, Seal
TJ
TRANSMISSION AND TRANSFER CASE 21 - 73
CLEANING AND INSPECTION (Continued)