Jeep Grand Cherokee, Operating Information Manual

Page: 146 / 315

Manual Heating And Air
Conditioning
The Manual Temperature Controls consist of a
series of outer rotary dials and inner push
knobs.
Blower Control
Rotate this control to
regulate the amount of
air forced through the
ventilation
system in
any mode. The blower
speed increases as you
move the control to the
right from the “O” (OFF) position. There are
seven blower speeds.
Temperature Control
Rotate this control to
regulate the tempera-
ture of the air inside the
passenger
compart-
ment. Rotating the dial
left into the blue area of
the
scale indicates
cooler temperatures,
while rotating right into
the red area indicates
warmer temperatures.
NOTE:
If your air conditioning performance seems
lower than expected, check the front of the
A/C condenser located in front of the radia-
tor for an accumulation of dirt or insects.
Clean with a gentle water spray from behind
the radiator and through the condenser.
Fabric front fascia protectors may reduce
airflow to the condenser, reducing air con-
ditioning performance.
Mode Control (Air Direction)
Rotate this control to
choose
from several
patterns of air distribu-
tion. You can select ei-
ther a primary mode as
identified by the sym-
bols on the control, or a
blend of two of these
modes. The closer the
setting is to a particular
symbol, the more air distribution you receive
from that mode.
Panel
Air is directed through the outlets in the
instrument panel. These outlets can be
adjusted to direct airflow.
NOTE:
The center instrument panel outlets can be
aimed so that they are directed toward the
rear seat passengers for maximum airflow
to the rear.
142