Jeep Grand Cherokee, Operating Information Manual

Page: 73 / 315

•
After the “Ready” prompt and the following
beep, say “Setup Phone Pairing”.
•
When prompted, say “List Phones”.
•
The Uconnect™ Phone will play the phone
names of all paired mobile phones in order
from the highest to the lowest priority. To
“select” or “delete” a paired phone being
announced, press the
button and say
“Select” or “Delete”. Also, see the next two
sections for an alternate way to “select” or
“delete” a paired phone.
Select Another Mobile Phone
This feature allows you to select and start using
another phone paired with the Uconnect™
Phone.
•
Press the button to begin.
•
After the “Ready” prompt and the following
beep, say “Setup Select Phone” and follow
the prompts.
•
You can also press the button at any
time while the list is being played, and then
choose the phone that you wish to select.
•
The selected phone will be used for the next
phone call. If the selected phone is not
available, the Uconnect™ Phone will return
to using the highest priority phone present in
or near (approximately within 30 ft [9 m]) the
vehicle.
Delete Uconnect™ Phone Paired Mobile
Phones
•
Press the button to begin.
•
After the “Ready” prompt and the following
beep, say “Setup Phone Pairing”.
•
At the next prompt, say “Delete” and follow
the prompts.
•
You can also press the button at any
time while the list is being played, and then
choose the phone you wish to delete.
Things You Should Know About
Your Uconnect™ Phone
Uconnect™ Phone Tutorial
To hear a brief tutorial of the Uconnect™ Phone
features, press the
button and say
“Uconnect™ Tutorial”.
Voice Training
For users experiencing difficulty with the
Uconnect™ Phone recognizing their voice
commands or numbers, the Uconnect™ Phone
Voice Training feature may be used. To enter
this training mode, follow one of the two follow-
ing procedures:
From outside the Uconnect™ Phone mode
(e.g., from radio mode)
•
Press and hold the button for five
seconds until the session begins, or,
•
Press the button and say the “Voice
Training, System Training, or Start Voice
Training” command.
You can either press the Uconnect™ Phone
button to restore the factory setting or repeat
the words and phrases when prompted by the
Uconnect™ Phone. For best results, the Voice
Training session should be completed when
the vehicle is parked with the engine running,
all windows closed, and the blower fan
switched off.
69