Jeep GRAND CHEROKEE 4xe 2023, Owner'S Manual

Page: 40 / 440

38 GETTING TO KNOW YOUR VEHICLE
NOTE:

If the charging schedule is not enabled, the
vehicle will charge whenever plugged in. It is not
necessary to set up the charging schedule to
charge the vehicle.

If “Charge Until Full” is selected, the vehicle
must be plugged in within five minutes prior to
the scheduled start time.

If “Charge Until Full” is selected, and the vehicle
is plugged in after the start time of the schedule,
the vehicle will start charging when it reaches
the start time the next day. If you would like to
begin charging immediately, and continue
charging until the vehicle is fully charged, you
must select the “Charge Now” option or use the
double plug override option.

If the vehicle is plugged in outside of the set
charging schedule (and “Charge Until Full” is not
selected), the vehicle’s battery will not charge.
Charging will only begin immediately if the
vehicle is plugged in within the time and day of
the week set in the schedule or the schedule is
bypassed. Otherwise, charging will automati-
cally begin when the selected charge time and
day of the week occurs when plugged in.

Scheduled Charging may be bypassed and
charging will begin automatically if the high
voltage battery state of charge is below its
optimal operating point.
SCHEDULE BYPASS
If the vehicle is turned off outside of the charging
window, a radio pop-up message will be displayed.
The pop-up message asks the driver if they would
like to “Charge Now?” and provides the next
charging schedule start time and estimated time to
charge the battery to 100%. If within one hour of
selecting “Yes”, the vehicle is connected to a
powered charging cable, the vehicle will
immediately begin to charge (temporarily ignoring
any set charge schedule). To fully deactivate the
charge schedule, select the “Enable Schedule”
checkbox until the check mark is removed from
the box.
The charging schedule can also be overridden if
the charging cable is plugged in, unplugged, and
then plugged in a second time to the vehicle.
This double plug sequence will override the set
schedule in the Hybrid Electric App, and begin
charging the vehicle immediately. The double plug
sequence must be completed within 10 seconds
for it to override the programmed schedule.
e-Save
The fourth screen within the Hybrid Electric App is
the e-Save screen. From this screen, you can
specify the behavior of the e-Save drive mode:
e-Save Screen

Battery Save - Maintains the high voltage State
of Charge at its current level under most driving
scenarios.
NOTE:
The State of Charge may increase if there is suffi-
cient energy capture through regenerative braking.

Battery Charge - Uses additional power from the
gas engine to increase the high voltage State of
Charge, up to 40%, 60%, or 80% capacity.
23_WL_H_OM_EN_EE_t.book Page 38