Jeep GRAND CHEROKEE 4xe 2023, Owner'S Manual

Page: 35 / 440

GETTING TO KNOW YOUR VEHICLE 33
Charging Inlet Warning Label
NOTE:
During normal operation, the charge connector or
AC plug may feel warm. If either one feels hot
during charging, unplug the Mode 2 Charging
Cable and have a qualified electrician inspect the
wall outlet before you continue charging.
M
ODE
3 C
HARGING
(32 A
MP
)
Your vehicle may be equipped with a 32 Amp
charging cable. A Mode 3 Charging Cable can be
connected to a public AC charging station and
conforms with standards ENb61851-b1,
ENb2196-c 1 ed, and ENb62196-c2. A Mode 3
Charging Cable can be used in temperature ranges
from -40°F to 122°F (-40°C to 50°C).
When using public charging stations, ensure the
charging station is ready to provide charge and the
vehicle is in PARK before the Mode 3 Charging
Cable is plugged into the vehicle’s charge inlet.
NOTE:
The vehicle should start charging automatically.
If not, please check the following:

Charging Station — Check the indications and
instructions at the charging station.

Charging Schedule — Check whether the
charging schedule is enabled and if so, whether
the vehicle is currently within the scheduled
charge time/day (weekday/weekend). If the
charging schedule is enabled within the vehicle,
you may override it for this charging event by
plugging in the charge connector, unplugging it,
and then plugging it back into the vehicle charge
inlet. Complete the double plug sequence within
10 seconds or push the button on the touch-
screen to override the set schedule.

Hood Ajar — Check whether the hood is open.
Charging is disabled while the hood is open, and
will resume when the hood closes.
To stop the charging process:

Press the “STOP” button located on the front of
the charging station.

Push the unlock button on the key fob to unlock
the charge inlet.
NOTE:
The charging connector must be removed from the
charge inlet within one minute of pushing the
unlock button on the key fob, or the charge inlet
will relock and the vehicle will resume charging.

Remove the connector from the vehicle
charge inlet.

Plug the charge handle into the charging station
and coil the charging cord onto its holder. Do not
leave the charging cord lying on the ground.
1 — Charging Timer Set
2 — Charging Procedure In Progress
3 — Risk Of Electric Shock
4 — Dangerous Situation
5 — Charging Procedure Complete
6 — Fault In Charging Procedure
7 — Reference Owner’s Information
WARNING!
INSTRUCTIONS PERTAINING TO A RISK OF FIRE
OR ELECTRIC SHOCK: Do not use the Mode 2
Charging Cable with an outlet that is worn or
damaged. Failure to follow this warning can
result in electrical shock, fire, property damage,
and death or serious injury.
2
23_WL_H_OM_EN_EE_t.book Page 33