Jeep CHEROKEE 2017 User Manual Download Page 186

Page: 186 / 374

1 — Fuel Fill Location

2 — Diesel Exhaust Fluid Fill Location

NOTE:

There is no fuel filler cap. A flapper door
inside the filler pipe seals the system.

3. Insert the fuel nozzle fully into the filler

pipe – the nozzle opens and holds the
flapper door while refueling.

4. Fill the vehicle with fuel – when the fuel

nozzle “clicks” or shuts off the fuel tank is
full.

5. Wait five seconds before removing the

nozzle to allow fuel to drain from the
nozzle.

6. Remove the fuel nozzle and close the fuel

door.

Emergency Fuel Can Refueling

Most fuel cans will not open the flapper door.

A funnel is provided to open the flapper door
to allow emergency refueling with a fuel can.

1. Retrieve funnel from the spare tire kit.

2. Insert funnel into same filler pipe opening

as the fuel nozzle.

Fuel and Diesel Exhaust Fluid Fill Location

Fuel Fill Funnel/Spare Tire/Jack And Tools

1 — Cap-Less Fuel Fill Funnel
2 — Spare Tire
3 — Tire Changing Tools And Jack

ARTING

AND

OPERA

TING

184

Summary of Contents for CHEROKEE 2017






















































































































































































































































































































































































Search results

Summary of Contents for CHEROKEE 2017

Reviews:

Related manuals for CHEROKEE 2017

Brands by name

Popular brands

Jeep CHEROKEE 2017, User Manual

Search results

Summary of Contents for CHEROKEE 2017

Reviews:

Related manuals for CHEROKEE 2017

Brands by name

Popular brands