manualshive.com logo in svg

Jeep 2010 Grand Cherokee, Owner'S Manual

The Jeep 2010 Grand Cherokee Overview Manual is now available for free download on manualshive.com. This comprehensive manual provides detailed information on every aspect of the iconic SUV, allowing owners to understand and maintain their vehicle with ease. Start your hassle-free download today and unleash the full potential of your Jeep Grand Cherokee.

Share
Download
background image

CAUTION!

Under frequent heavy-duty driving conditions,
change all lubricants, and lubricate body compo-
nents, all driveline joints and steering linkage more
often than in normal service, to prevent excessive
wear.

Appearance Care and Protection from Corrosion

Protection of Body and Paint from Corrosion

Vehicle body care requirements vary according to geo-
graphic locations and usage. Chemicals that make roads
passable in snow and ice, and those that are sprayed on
trees and road surfaces during other seasons, are highly
corrosive to the metal in your vehicle.

The following maintenance recommendations will enable
you to obtain maximum benefit from the corrosion
resistance built into your vehicle.

What Causes Corrosion?

Corrosion is the result of deterioration or removal of
paint and protective coatings from your vehicle.

The most common causes are:

•

Road salt, dirt and moisture accumulation.

•

Stone and gravel impact.

•

Insects, tree sap and tar.

•

Salt in the air near seacoast localities.

•

Atmospheric fallout/industrial pollutants.

Washing

•

Wash your vehicle regularly. Always wash your ve-
hicle in the shade using MOPAR

威

Car Wash or a mild

car wash soap, and rinse the panels completely with
clear water.

7

MAINTAINING YOUR VEHICLE

393

Summary of Contents for 2010 Grand Cherokee



















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Grand Cherokee

M7 SPEED R56 Installation Manual preview
R56
Brand: M7 SPEED Pages: 11
Hama 00201510 Operating Instructions Manual preview
00201510
Brand: Hama Pages: 40
Fiat 500 L 2019 User Manual preview
500 L 2019
Brand: Fiat Pages: 172
Honda HondaLink Quick Start Manual preview
HondaLink
Brand: Honda Pages: 6
Cadillac 1999 DeVille Owner'S Manual preview
1999 DeVille
Brand: Cadillac Pages: 368
Luverne 205760 Installation Instructions preview
205760
Brand: Luverne Pages: 3
Navman B2+ User Manual preview
B2+
Brand: Navman Pages: 27
Porsche 01-B Web Application Manual preview
01-B
Brand: Porsche Pages: 313
Chevrolet 2014 TRAX Owner'S Manual preview
2014 TRAX
Brand: Chevrolet Pages: 412
FALCON RIDGE BC-3400-FC05 Instructions For Installation And Care preview
BC-3400-FC05
Brand: FALCON RIDGE Pages: 7
Volvo 2004 C70 HPT User Manual preview
2004 C70 HPT
Brand: Volvo Pages: 30
Subaru 360 Sedan Service Manual preview
360 Sedan
Brand: Subaru Pages: 16
Meta System FrontPlate4 Manual preview
FrontPlate4
Brand: Meta System Pages: 16
Mobility Networks RPH 35.13 Use And Maintenance Manual preview
RPH 35.13
Brand: Mobility Networks Pages: 52
Omix-Ada Alloy Rugged Ridge X-Clamp Manual preview
Alloy Rugged Ridge X-Clamp
Brand: Omix-Ada Pages: 2
Dodge 8W-70 Wiring Diagram preview
8W-70
Brand: Dodge Pages: 3
Black Horse Off Road TO20 Installation Instructions Manual preview
TO20
Brand: Black Horse Off Road Pages: 7
E&G Classics Black Ice Mesh Instruction Manual preview
Black Ice Mesh
Brand: E&G Classics Pages: 4

Brands by name

Popular brands

Load more brands