Home
/
Jeep
/
2010 Grand Cherokee
/
Owner'S Manual

Jeep 2010 Grand Cherokee, Owner'S Manual, Page: 251 / 466

Share

Page: 251 / 466

Jeep 2010 Grand Cherokee Owner'S Manual Download Page 251

performance and reduce the potential for transmission
overheating or failure due to excessive shifting. When
operating in TOW/HAUL mode, the transmission will
shift into direct gear and Overdrive will be enabled
under steady cruise conditions.

The “TOW/HAUL Indicator Light” will illuminate in the
instrument cluster to indicate when the switch has been
activated. Pressing the switch a second time restores
normal operation. If the TOW/HAUL mode is desired,
the switch must be pressed each time the engine is
started.

Transmission Limp Home Mode

Transmission function is monitored for abnormal condi-
tions. If a condition is detected that could result in
transmission damage, the Transmission Limp Home
Mode will be engaged. In this mode, the transmission
will remain in the current gear (3.7L engine) or in direct
gear (5.7L engine) until the vehicle is brought to a stop.

To reset the transmission, use the following procedure:

1. Stop the vehicle.

2. Move the shift lever into the PARK position.

TOW/HAUL Switch

250

STARTING AND OPERATING

«
...
249
250
251
252
253
...
»

Summary of Contents for 2010 Grand Cherokee



















































































































































































































































































































































































































































































Reviews:

No comments