Jeep 2010 Grand Cherokee Owner'S Manual Download Page 170

Page: 170 / 466

•

Compass Display

•

Outside Temperature Display

•

Trip Computer Functions

The system allows the driver to select information by
pressing the following buttons mounted on the steering
wheel:

MENU Button

Press and release the MENU button and the
mode displayed will change between Trip
Functions, Personal Settings, and System Sta-
tus.

FUNCTION SELECT Button

Press the FUNCTION SELECT button to select the
displayed function YES (Y) or NO (N).

SCROLL Button

Press the SCROLL button to scroll through Trip
Functions,

Personal

Settings

(Customer-

Programmable Features), and System Status Messages.

COMPASS/TEMPERATURE Button

Press

and

release

the

COMPASS/

TEMPERATURE button to display one of eight
compass readings and the outside temperature.

Electronic Vehicle Information Center (EVIC)
Displays

When the appropriate conditions exist, the EVIC displays
the following messages:

•

TURN SIGNAL ON

•

PERFORM SERVICE

•

DAMAGED KEY — KEY DOES NOT COMMUNI-
CATE

UNDERSTANDING YOUR INSTRUMENT PANEL

169

Summary of Contents for 2010 Grand Cherokee



















































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Grand Cherokee

Reviews:

Jeep 2010 Grand Cherokee, Owner'S Manual, Page: 170 / 466

Search results

Summary of Contents for 2010 Grand Cherokee

Reviews: