manualshive.com logo in svg

Jeep 2010 Grand Cherokee, Owner'S Manual

The Jeep 2010 Grand Cherokee Overview Manual is now available for free download on manualshive.com. This comprehensive manual provides detailed information on every aspect of the iconic SUV, allowing owners to understand and maintain their vehicle with ease. Start your hassle-free download today and unleash the full potential of your Jeep Grand Cherokee.

Share
Download
background image

EMERGENCY TOW HOOKS — IF EQUIPPED

If your vehicle is equipped with tow hooks, there will be
one in the rear and two mounted on the front of the
vehicle. The rear hook will be located on the driver’s side
of the vehicle.

NOTE:

For off-road recovery, it is recommended to use

both of the front tow hooks to minimize the risk of
damage to the vehicle.

CAUTION!

Tow hooks are for emergency use only, to rescue a
vehicle stranded off road. Do not use tow hooks for
tow truck hookup or highway towing. You could
damage your vehicle.

WARNING!

Stand clear of vehicles when pulling with tow hooks.
Tow straps and chains may break, causing serious
injury.

TOWING A DISABLED VEHICLE

Two-Wheel Drive Models Only

Provided the transmission is operable, tow only in NEU-
TRAL at speeds not exceeding 30 mph (48 km/h), for
distances of not more than 15 miles (24 km).

CAUTION!

Towing at more than 30 mph (48 km/h) or for more
than 15 miles (24 km), can cause severe transmission
damage. Such damage is not covered by the New
Vehicle Limited Warranty.

6

WHAT TO DO IN EMERGENCIES

359

Summary of Contents for 2010 Grand Cherokee



















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Grand Cherokee

APEXi V-AFC II Instruction Manual preview
V-AFC II
Brand: APEXi Pages: 18
Prorack K519 Fitting Instructions For Basic Carrier preview
K519
Brand: Prorack Pages: 15
U & Me Brothers LK-168A Manual preview
LK-168A
Brand: U & Me Brothers Pages: 6
Yakima StickUp Installation Instructions Manual preview
StickUp
Brand: Yakima Pages: 21
Dodge Dodge Challenger SRT8®Challenger SRT8 392 2012 Specifications preview
Dodge Challenger SRT8®Challenger SRT8 392 2012
Brand: Dodge Pages: 5
Edelbrock 65932 Installation Instructions preview
65932
Brand: Edelbrock Pages: 2
Mercedes-Benz 2015 SLK Operator'S Manual preview
2015 SLK
Brand: Mercedes-Benz Pages: 358
Waeco Magic Watch MWE-850-4DSM Installation And Operating Manual preview
Magic Watch MWE-850-4DSM
Brand: Waeco Pages: 204
Mont Blanc ACTIVA+ Assembly Instructions preview
ACTIVA+
Brand: Mont Blanc Pages: 2
Cadillac 2000 DeVille Service Manual Addendum preview
2000 DeVille
Brand: Cadillac Pages: 19
Reliant ROBIN 850 Workshop Manual preview
ROBIN 850
Brand: Reliant Pages: 206
Brodit Getac T800 Quick Start Manual preview
Getac T800
Brand: Brodit Pages: 2
Saturn 2009 OUTLOOK Owner'S Manual preview
2009 OUTLOOK
Brand: Saturn Pages: 432
Prime Design FEA-0004 Assembly Instructions Manual preview
FEA-0004
Brand: Prime Design Pages: 12
Motoalliance Denali MA11737 Manual preview
Denali MA11737
Brand: Motoalliance Pages: 4
Ranger design 1525-NSX Quick Start Manual preview
1525-NSX
Brand: Ranger design Pages: 22
Tesla Gen 3 Manual preview
Gen 3
Brand: Tesla Pages: 42
Carbest 47804 Instruction Manual preview
47804
Brand: Carbest Pages: 64

Brands by name

Popular brands

Load more brands