manualshive.com logo in svg

Jeep 2010 Grand Cherokee, Owner'S Manual, Page: 351 / 466

Share
Download
Jeep 2010 Grand Cherokee Owner'S Manual Download Page 351

CAUTION!

•

The winch mechanism is designed for use with the
jack extension tube only. Use of an air wrench or
other power tools is not recommended and can
damage the winch.

•

When the spare is clear, tilt the retainer at the end of
the cable and pull it through the center of the wheel.

Preparations for Jacking

1. Park the vehicle on a firm, level surface. Avoid ice or
slippery surfaces.

WARNING!

Do not attempt to change a tire on the side of the
vehicle closest to moving traffic. Pull far enough off
the road to avoid being hit when operating the jack
or changing the wheel.

2. Set the parking brake.

3. Place the shift lever into PARK.

4. Turn the ignition OFF.

5. Turn on the Hazard Warning flasher.

6. Block both the front and rear of the
wheel diagonally opposite of the jack-
ing position. For example, if changing
the right front tire, block the left rear
wheel.

NOTE:

Passengers should not remain in the vehicle

when the vehicle is being jacked.

350

WHAT TO DO IN EMERGENCIES

Summary of Contents for 2010 Grand Cherokee



















































































































































































































































































































































































































































































Reviews:

No comments