Jeep 2009 Commander Page 260 Owner'S Manual Download

Page: 260 / 519

Connecting The iPod

姞

Use the optional connection cable to connect an iPod

威

the vehicle’s 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
iPod

威

is connected and synchronized to the vehicle’s UCI

system (iPod

威

may take a few seconds to connect), the

iPod

威

starts charging and is ready for use by pressing

radio switches, as described below.

NOTE:

•

You may have to remove the connector pin protection
cap from the 16–pin connector port, prior to connect-
ing the cable.

•

If the iPod

威

battery is completely discharged, it may

not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod

威

connected

to the UCI system may charge it to the required level.

Using This Feature

By using the optional connection cable to connect an
iPod

威

to the vehicle’s UCI 16–pin connector port:

•

The iPod

威

audio can be played on the vehicle’s sound

system, providing metadata (Artist, track title, album,
etc.) information on the radio display.

•

The iPod

威

can be controlled using the radio buttons to

Play, Browse, and List the iPod

威

contents.

•

The iPod

威

battery charges when plugged into the UCI

connector.

Controlling The iPod

姞

Using Radio Buttons

To get into the UCI (iPod

威

) mode and access a connected

iPod

威

, press the ‘AUX’ button on the radio faceplate.

Once in the UCI (iPod

威

) mode, iPod

威

audio tracks (if

available from iPod

威

) start playing over the vehicle’s

audio system.

258

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2009 Commander








































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Commander

Reviews:

Related manuals for 2009 Commander

Brands by name

Popular brands

Jeep 2009 Commander, Owner'S Manual

Search results

Summary of Contents for 2009 Commander

Reviews:

Related manuals for 2009 Commander

Brands by name

Popular brands