Home
/
Jeep
/
2009 Commander
/
Owner'S Manual

Jeep 2009 Commander, Owner'S Manual, Page: 154 / 519

Share

Page: 154 / 519

Jeep 2009 Commander Owner'S Manual Download Page 154

the steering wheel outward or push it inward as desired.
To lock the steering column in position, push the control
handle upward until fully engaged.

WARNING!

Do not adjust the steering wheel while driving. The
telescoping adjustment must be locked while driv-
ing. Adjusting the steering wheel while driving or
driving without the telescoping adjustment locked
could cause the driver to lose control of the vehicle.

ADJUSTABLE PEDALS — IF EQUIPPED

This feature allows both the brake and accelerator pedals
to move toward or away from the driver to provide
improved position with the steering wheel. The adjust-
able pedal system is designed to allow a greater range of
driver comfort for steering wheel tilt and seat position.

The position of the brake and accelerator pedals can be
adjusted without compromising safety or comfort in
actuating the pedals.

Press the bottom of the switch to move the pedals
forward (away from the driver).

Adjustable Pedal Switch

152

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
152
153
154
155
156
...
»

Summary of Contents for 2009 Commander








































































































































































































































































































































































































































































































































Reviews:

No comments