6
18.PFL SWITCH
When the PFL switch is pressed, the prefader signal is fed to the headphone and
CLIP LED will be lighting also RUDE AFL/PFL LED is turn on flashing of status
for left, right meter of input level.
23.EQUALIZER(HF,MF,LF)
The EQ comprises three sections the upper control provides H.F 12KHz(treble).
Boost and cut of
±
15dB. Each stereo input is provided with 3 band EQ section.
HF and LF 80Hz are shelving type and MD 2.5KHz is peaking type.
24.BALANCE
The bal control sets the relative group of the left and right level, in the center
position. Its gain is unity. Tuming the control fully clockwise increases the right
group(R, 2-4), full counterclockwise rotation is the left group(L, 1-3).
22.MONO SWITCH
Pressing this switch, it will be changed into from stereo signal.
20.STEREO INPUT
Stereo inputs have two left and right unbalanced RCA jack and two left and right
balanced 1/4" phone jack with tip '+', ring '-', sleeve 'groud'.
21.GAIN CONTROL
You can adjust input sensitivity of stereo balanced and unbalanced in detail
through gain control. Variable range is 40dB and stereo input sensitivity range is
-20dB ~ +20dB.
19.CHANNEL FADER
This longthrow fader determines the proportion of the channel in the mixer and
provides a clear visual indication of channel level. Normal operating position is at
the 'o' mark, providing 10dB of gain above that point if required.
Remark :
Usually position of channel fader should be located at "U"
※
Remark :
In case of same level input, it will be increased at 6dB.
※
MONO STRIP
18
19
PFL
10
+dB
dB
5
U
5
10
20
30
50
1
OO
STEREO STRIP
23
21
22
14
24
15
15
U
U
15
15
L .R
M I X
3 4
1 2
L
R
1 3
2 4
BAL
12KHz
HF
80Hz
LF
15
15
U
2.5KHz
MF
+5
–10
0
+20
–20
dB
+10
–15
MONO
GAIN
Warning :
It is necessary to adjust gain control for the better noise and headroom
※
STEREO STRIP
20
9/10
Channel
R
L
R
L
