12
49.STEREO AUX RETURNS INPUTS(1~4)
The AUX returns are stereo 1/4" balanced phone jacks with left signal on the tip, right signal on the ring and the
sleeve on ground. Nominal input level is +4dB(1.23V RMS).
If you have only one signal, plugging signal'+', into the tip or the ring but the other tip or ring has to be open.
When you depress the mono switch(25) in the AUX return section on the above the GRP strip of the front panel,
the signal sent into both L and R circuits in your stereo image.
NOTE :
when the product send mono output signals into the jack, if the mono switch is depressed the signal
evel is down or not operating in unplugged tip or ring's ground.
50.MONITOR OUTPUTS(LEFT, RIGHT)
The monitor output jacks are 1/4" unbalanced, wired tip'+', sleeve ground.
This is where you connect your control room monitor amplifier inputs, the nominal output level is 0dB(0.775V
RMS).
NOTE :
when you use talkback mic. To prevent feedback situation, turn down the talkback level properly in the
control room.
51.AUX SENDS(1~4)
The Aux sends are 1/4" unbalanced phone jacks, wired tip to '+' and sleeve to 'ground'. These are independent
from main output section. Therefore, you can use handy them Aux outputs for. Fold back(effect or monitor output
for musician performance)or using expended speaker system.
52.POWER (Only for the Stage pro )
When the power switch is turned on, the power is supplied.
53.POWER INLET
The power inlet is the socket to supply the AC power. You turn on the power switch after plugging the AC cord.
The fuse is built in the socket.
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
45
50
51
47
48
53
49
46
1
2
3
TRIPAC PANNELS
