9
35. GROUP, L . R MIX OUTPUT SECTION
●
GROUP FADER(1~4)
Long throw fader are provided for each group with unity gain at the top of their travel normal posit at "U" mark
is 4dB, providing 10dB of gain adove that point if required.
36. POWER
Pressing this switch, power will be turn on with green LED.
39. AUX AFL SWITCHES(1~4)
Pressing these switches, you can check AUX final output status with lighting of AUX AFL, PFL LED and can be
checked output signal of left and right level meter with RUDE AFL/PFL LED.
38. AUX SENDS(1~4)
This is master volume of AUX output, adjusting AUX send volume. Pressing No31, each AUX output level will be
indicated.
37. PHANTOM POWER(Only for Tripac series)
Pressing this switch. 48V phantom power will be fed to XLR pin 2,3 of group.
*
Warning
Before pressing phantom switch on, turn channel sensitivity controller to the counterclockwise, to protect
speaker, do not insert condenser mic or pick up under phantom power "on".
●
L
●
R MIX FADER
The L
●
R Mix fader is stereo fader located in the circuit after L
●
R insert jack but before the final line amplifier
the fader controls the level of L
●
R Mix bus with precise 'dB' marmarking and unity gain point marked on the
panel.
0
10
AUX1
U
AUX
AFL.PFL
+48V
0
10
AUX2
U
0
10
AUX3
U
0
10
AUX4
U
AFL
AFL
AFL
AFL
POWER
SEND 2
SEND 1
SEND 4
SEND 3
GRP1
GRP2
GRP3
GRP4
L.R MIX
38
39
37
36
10
+dB
dB
5
U
5
10
20
30
50
OO
10
+dB
dB
5
U
5
10
20
30
50
OO
10
+dB
dB
5
U
5
10
20
30
50
OO
10
+dB
dB
5
U
5
10
20
30
50
OO
10
+dB
dB
5
U
5
10
20
30
50
OO
35
