- 94 -
13.3 BERTHING, ANCHORING, TOWING
13.3.1 Anchor points
Responsibility
It is the responsibility of the owner/user of the boat to ensure that the berthing lines, towing
cables, chains and mooring lines and the anchors are adequate for the intended use of the
boat, i.e. that the lines or chains do not exceed 80 % of the breaking strength of the
corresponding anchor point.
If non-metal anchor points are installed on the boat, their limited lifespan must be taken into
account. They must be replaced as soon as they show signs of deterioration, visible surface
cracks or permanent deformation.
MOORING LINES / MOORING / TOWING
Reference
A / B
Anchor Point
Breaking Strength
12,1 kN
Mooring Line/Chain
Breaking Strength
9,7 kN
Pass warps through the fairleads provided for this purpose.
Towing ring:
used only for towing purposes.
Any other use is dangerous and forbidden.
Summary of Contents for MERRY FISHER 695 MARLIN
