Chapter 3
Starting up
Charging the battery
16
User Manual
790000002/00
Charging the battery
Connecting the
mains adapter
1
Set the appropriate adaptable plug to the power supply cable,
according to your country (see
).
2
At the right side of the 2000 Platform, lift up the power supply socket
protector and plug in the mains adapter.
3
Connect the adapter to the mains.
The
On
indicator lamp starts to blink in green.
First use of the
battery
At the delivery, the battery is already set into the Platform, but its charge
level is not «recognized» by the equipment.
The icon
is displayed on the upper banner of the screen.
To get a valid indication of the battery, and be able to use correctly the
Platform:
1
Charge fully the battery
2
Once fully charged, discharge the battery by keeping the Platform
switched on, but not plugged to mains.
3
The battery can then be charged, and the Platform used simultane-
ously.
Charging the
battery
On connection to the mains:
–
if the user does not press
O
N
, the battery will start the charge. In this
case, the
Charge
indicator will be lit in red.
–
when the user presses the
O
N
key, the instrument starts up and the
battery will charge during use (
Charge
indicator in solid red).
Once the battery is fully charged, the
Charge
indicator is lit in solid green.
When the
Charge
indicator is blinking red, this mean the power supply is
not compatible with the battery used. Charge is disabled.
Use only the mains adapter supplied with the 2000 Platform. The
adapter for some other electronic device may appear to be
identical, but entails a risk of damage to the 2000 Platform.
It is essential to wait until charging is complete to ensure
maximum independent operating time, which may otherwise be
considerably reduced.
2000 Platform English rev00.book Page 16 Lundi, 20. juin 2011 1:47 13
