Chapter 11
Maintenance and Troubleshooting
Maintenance procedure
80
User Manual
790000002/00
Maintenance procedure
Maintenance work on this instrument must only be undertaken
by qualified personnel using suitable equipment.
In most cases, it is advisable to contact the nearest JDSU Service
Centre, which will undertake the appropriate troubleshooting and repair
work.
The performance and technical complexity of the 2000 Platform class
this instrument in a new generation of equipment, for which JDSU has
laid down a maintenance policy based on the principle of standard
module replacement.
In implementation of this policy, we have set up powerful card trouble-
shooting test resources in our factories and a rapid dispatch system
operating between our factories and branches.
Only by this procedure can the high quality of the instrument continue to
be ensured after repair work. This procedure also has the advantage of
reducing repair costs and time.
In the interests of quality and efficiency, we strongly recommend adop-
tion of the following procedure in the event of a fault, before any other
steps are taken:
–
Verify that the instrument is plugged in.
–
Check the connections of any peripheral equipment to the 2000
Platform.
–
If a fault is detected, or in case of doubt, it is advisable to contact the
nearest JDSU Service Centre, which will undertake the appropriate
repair work.
Cleaning
Cleaning plates
and housings
The front and rear plates and the housings may become tarnished with
handling. To clean them, use only a rag moistened with soapy water.
Never use any product containing acetone, trichloro-ethylene, benzine or
alcohol, as these will attack the printed markings.
Cleaning the
screen
To clean the screen, use an antistatic product.
2000 Platform English rev00.book Page 80 Lundi, 20. juin 2011 1:47 13
