Chapter 8
Transferring the 2000 Platform Interface
Establishing connection
64
User Manual
790000002/00
Establishing connection
The connection between 2000 Platform and the PC can be done directly,
or via a local network.
The transfer of the interface can be done using a VNC window on PC.
Connecting the
2000 Platform
and the PC
1
Connect the 2000 Platform to the PC via an Ethernet cable, using
the RJ45 connectors set on both equipments.
2
Check the network connection on the PC is set in Dynamic mode.
Configuring the
2000 Platform
1
In the
Home
page of the 2000 Platform, validate the
Settings
icon.
2
In the
System Settings
page, in the
I/O Interfaces
box, configure
the following parameters:
Ethernet > Mode
Parameters of the local Ethernet network to which the 2000 Platform is
connected:
Config 1 to 4
static mode enabling input of the configuration of
4 sites. If this parameter is selected, the folowing
parameters must be entered:
– Site Name
the user can enter the name of the site in the Edit
menu.
For an intensive use of the deport screen or when it is used via a
WAN network, it is strongly recommended to use a dedicated
VNC client. The VNC clients recommended are Tight VNC (V 1.2.9
or later) and Real VNC (V 4.1.1 or later).
Fig. 38
Connection 2000 Platform and PC
2000 Platform English rev00.book Page 64 Lundi, 20. juin 2011 1:47 13
