7
ASSEMBLY
With the rack and soft topper in place, you can install the corner support
brackets using the 5/16”-18 x 3/4” button head bolts and 5/16”-18 serr.
flange nuts. The rear bracket is the one with the hole cut out of the middle
of it. The rear brackets mount to the slots on the inside of the leg and the
inside of the top cross bar. Make sure that the bolts going into the rear leg
go out through the inside of the rear leg so that you have room to get to
the head of the bolt. The front brackets can mount to the inside or outside,
but we recommend mounting them to the outside because it can be easier.
