ASSEMBLY
2
Next, mount two of the wider bars between the front and rear legs using
the 5/16”-18 x 3/4” button head bolts, 1/4” washers and 5/16”-18 serr.
flange nuts. You will see that there are several mounting options for this
bar. The position that you put these bars in will be dependent on if and
where you want the doors to be installed and which way you want them
to open. If you want the door to open up, you can put this bar in the top
or bottom slot. If you want the door to open down, you will have to put
this bar in the top slot. Once you have that tightened into place, you can
tighten the bolts on the top rail as well.
