15
ASSEMBLY
Next, if you have installed a soft topper, undo the nuts on the bolts for the
clamps on leg. Next, place the hook shaped soft topper bracket into the
hole in the rail of the soft topper and hold the other soft topper bracket
underneath it so that the holes on the two line up and the carriage bolts
go through the slots in the bottom bracket. Once they are oriented
correctly, move the bottom bracket roughly 1/8” down and tighten it into
place. Then, with the upper bracket still hooked into the channel on the
soft topper, use a
5/16”-18 X 3/4” bolt, M8 washer and 5/16”-18 nylock nut to tighten the
two soft topper brackets together. Make sure that they sit flat against each
other. We recommend getting some rubber weather stripping to line the
bottom edge of the soft top in order to get it as weather tight as possible.
