December, 2006
© 2006, JCM American, Corporation
1 2
1 7
Lecture Notes
Lecture Notes
Front Panel LED - Indications and Troubleshooting (Continued)
•
Green and Red LED lit
—
An inhibited coin was inserted. Activate coin channels
via the DIP Switches located on the rear of the Validator Unit, or by using the Palm
Pilot
®
PDA A66US application.
•
Yellow LED flashes once (1X)
—
The A-66 monitors the 'coin return' line for
proper operation. If 'active' for too long, an error indication is provided.
•
Yellow LED flashes twice (2X)
—
An optical sensor located on each of the 'pay-
out' motors is used to indicate a 'payout complete' operation. If a payout error
occurs due to jammed coins in a Payout Tube or a motor problem, the A-66 will
attempt to clear the problem and retry three (3) times before timing out.
•
Yellow LED flashes (3X)
—
The coin changer has been inhibited by the vending
machine. Vending machine may be empty or defective.
•
Red LED flashes once (1X)
—
An optical sensor located just below the 'Acceptor
Gate' in the Validator Unit functions as a 'coin accepted' sensor and is also used to
report a jam in the coin acceptance path.
•
Red LED flashes twice 2X
—
The optical sensor located in the Cash Box Channel
is reporting a coin jam.
•
Red LED flashes 3X
—
The Vending Machine is not communicating with the
Coin Changer and/or no commands have been sent for over two seconds. Check the
Vending Machine Controller or the connecting cables for faults.
PalmStat (Continued)
6. Select
'See Data'
and a list of available past and current data files is presented
allowing the selection of any data file desired for view. Selecting any file will
present the Figure 13 menu buttons for selecting three (3) pages of statistics:
– a
Fault List
– the
Statistic Counter 1
– the
Statistic Counter 2
Figure 14
Fault List Screen
Figure 13
List Selection Screen
Figure 16
Statistic Counter 2 Screen
Figure 15
Statistic Counter 1 Screen
