background image

3-10

©2019 JBT LEKTRO, INC. All rights reserved.

October 2019

LEKTRO 88/89 SERIES - OPERATION MANUAL

Parking Brake:

 Hand-activated electric switch controlling spring-applied/hydraulic-released calipers mounted 

on each service brake disc.

Drive Tires:

 Single 28 x 15-15 solid-pneumatic traction tread. Siping, auto socks, and chains are optional.

Steer Tires:

 Single 23 x 10-12 solid-pneumatic traction tread mounted to a fully suspended steer axle.

Lighting:

 Forward and aft LED headlights. Four flashing amber LED running lights. Two cab-mounted amber 

strobe lights. Also includes LED brake lights and turn signals.

Operator Compartment:

 Dual premium-grade operator and passenger seats of molded polyurethane, 

including armrests. Features a fully suspended, adjustable setting for height, fore/aft, and weight. Seat belts 

and cab with heater, defroster, and windshield wipers are also included.

Camera and Monitors: 

Camera at aircraft capture area with color monitors at the “A” and “B” station are 

optional.

Construction: 

Welded steel plate and polymers preserved with primer and automotive high-gloss red or white 

enamel paint with protective polyurethane coating to prevent rust, scratches, and corrosion. Steel side rub rails 

and custom colors are optional.

3.4.2

SPECIFICATIONS

Length:

  .................................................................................................................................247.5 in / 628.6 cm

Width:

  ...................................................................................................................................101.5 in / 257.8 cm

Height (at lowest steering tilt setting): 

................................................................................65.6 in / 166.6 cm

Turning Radius:

  .........................................................................................................................209 in / 531 cm

Wheelbase:

 ...........................................................................................................................115.1 in / 292.3 cm

Vehicle Speed (empty): 

.........................................................................................................17 MPH / 27 KPH

Vehicle Speed (loaded to max. vehicle capacity): 

..............................................................14 MPH / 22 KPH

Lift Cradle Capacity:

 ..................................................................................................25,300 LBS / 11476 KG**

Nose Gear Cradle Lifting Height: 

................................................................................................. 11 in / 28 cm

Ground Clearance:

  .......................................................................................................................5 in / 12.7 cm

Shipping Weight (w/o batteries & charger):

 ................................................................ 12,000 LBS / 5443 KG

Shipping Weight (w/ motive batteries & charger): 

...................................................... 21,300 LBS / 9662 KG

Shipping Weight (w/o motive & GPU batteries & charger): 

....................................... 21,700 LBS / 9843 KG

Additional Options:

 Draw bar pin, specialized aircraft towing adapters, and custom high-lift adapters (consult 

LEKTRO)

**Lift capacity is calculated using a 30 in / 76 cm diameter aircraft tire in the lift cradle, with the aircraft tire center 

line at 26 in / 66 cm from the drive tire center line.

AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - [email protected]

Summary of Contents for LEKTRO 88 Series

















































































































































Reviews: