JBT LEKTRO 88 Series Operation Manual Download

Page: 127 / 144

October 2019

6-3

CHAPTER 6: DRIVING

WARNING

ALWAYS FASTEN YOUR SEAT BELT BEFORE MOVING THE TRACTOR.

10.Pull the Main Power Disconnect Switch up to turn it ON. See

"CENTER CONSOLE” on

page

4-11

11. Turn the Motive Power Switch (either key or lever) clockwise to turn it ON. See

"INSTRUMENT PANEL (RIGHT)” on page

4-10

> If the tractor is equipped with a single-level Aircraft Recognition System, then the yellow

Torque Caution Light and red Torque Warning Light should flash and an alarm should

sound momentarily.

> If the tractor is equipped with a multi-level Aircraft Recognition System, then the green

Zero Load Light, yellow Torque Caution Light and red Torque Warning Light should flash

and an alarm should sound momentarily.

See

"APS FAULTS AND TROUBLESHOOTING” on page

5-11

if the Aircraft Recognition

System does not respond in this manner.

12.Verify that sufficient charge remains to accomplish the required task. If equipped, you can do

this using the Battery Indicator Gauge. See

"INSTRUMENT PANEL (RIGHT)” on page

4-10

AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - [email protected]

Summary of Contents for LEKTRO 88 Series

















































































































































Search results

Summary of Contents for LEKTRO 88 Series

Reviews:

Related manuals for LEKTRO 88 Series

Brands by name

Popular brands

JBT LEKTRO 88 Series, Operation Manual

Search results

Summary of Contents for LEKTRO 88 Series

Reviews:

Related manuals for LEKTRO 88 Series

Brands by name

Popular brands