©2019 JBT LEKTRO, INC. All rights reserved.
October 2019
5-7
CHAPTER 5: BASIC OPERATIONS
3. Open the Forward Compartment, as described in
"ACCESSING COMPARTMENTS” on page
.
4. Insert a jack handle into the Jack Socket (3) on the top of the Hydraulic Manifold.
5. On the Hydraulic Manifold (1),
locate the black Parking Brake
Release Knob (2) on the right-hand
side, and then push the knob in and
hold it in position.
6. Pump the jack handle until the
Brake is released.
You may now tow the tractor.
5.4.1.2
JAM NUT AND BOLT
If your tractor is not equipped with a Hydraulic Manifold, then you will need to release the
brakes manually by releasing a Jam Nut and Bolt on each of the two brakes. To do this:
1. Chock the Drive Wheels.
2. Push the Main Power Disconnect Switch on the Center Console to the OFF position.
3. Open the Forward Compartment, as described in
"ACCESSING COMPARTMENTS” on page
.
4. Locate the Jam Nut and Bolt on each Brake, as shown here.
5. Release the Jam Nut by rotating it counterclockwise until it is well clear of the Brake
assembly.
6. Release the Bolt by rotating it counterclockwise until the Brake releases.
1
2
3
AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - [email protected]
