©2019 JBT LEKTRO, INC. All rights reserved.
October 2019
5-13
CHAPTER 5: BASIC OPERATIONS
5.5.3
RESETTING THE AIRCRAFT PROTECTION SYSTEM
The Aircraft Protection System must be reset when a torque warning is triggered. This warning:
• Continually illuminates the red Torque Warning Light.
• Continually sounds the alarm.
• Disables all tractor movement.
To reset the Aircraft Warning System:
1. Open the Forward Compartment, as described in
2. Insert the PLC Key into the Key Switch on the PLC, if not already present.
3. Turn the Key clockwise until it stops.
4. Return the Key to its original position by turning it counterclockwise.
5. If mandated by company policy, remove the Key from the PLC and return the Key to its
designated storage location.
6. Inspect the aircraft nose landing gear for damage, and then determine how to proceed
based on the inspection results.
WARNING
IF THE TORQUE WARNING ALARM IS TRIGGERED, THEN THE AIRCRAFT NOSE
LANDING GEAR MUST BE INSPECTED FOR DAMAGE BEFORE MOVING THE
AIRCRAFT.
AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - [email protected]
