![background image](http://html1.mh-extra.com/html/jbsystems-light/irock-7b/irock-7b_operation-manual_639878007.webp)
ENGLISH
OPERATION MANUAL
JB SYSTEMS®
9/58
iROCK 7S-7B
DMX-CONFIGURATION OF IROCK 7S-7B:
ENGLISH
OPERATION MANUAL
JB SYSTEMS®
10/58
iROCK 7S-7B
HOW TO OPERATE THE UNIT
Every time you turn the unit on, it will show Ir7b/Ir7s on the display and move all the motors to their ‘home’
position and you may hear some noises for about 20 seconds. After that the unit will be ready to receive
DMX signal or run the built-in programs.
You can operate the unit in three ways:
o
By master/slave built-in preprogram function
o
By CA-8 easy controller
o
By universal DMX controller
BY MASTER/SLAVE BUILT-IN PREPROGRAM FUNCTION:
Select this function when you want an instant show. By linking the units in master/slave
connection, the first unit will control the other units to give an automatic, sound
activated, synchronized light show. Its DMX input will have nothing plugged into it, and
its master-LED will be constantly on and sound-LED will flash to the music.
Important! This function only works when the blackout mode in the menu of the
master is set to OFF, otherwise nothing will happen! Read more about this
option in the “Main Menu” paragraph.
SLAVES have 2 working options:
The other units are set to slave mode (slave-
LED is constantly on). In order to create a great light show you can introduce
contrast movements (pan/tilt of slave is inverted)
In the menu of the slave units
you can go to option
and select:
o
Normal slave:
slave works in sync with the master.
o
2 light show:
slave works in opposite with the master.
BY EASY CONTROLLER:
When used in Master/slave mode we strongly advice you to use the CA-8 “Easy controller” Just connect
this small controller to the 1/4” jack of the master unit, and you will be able to control the following
FUNCTIONS:
Stand by Blackout the unit
Function
Strobe
1.Gobo/Color
sync. strobe
2.Sync. strobe
3.Two-light
strobe
X/Y moving
show mode
selection
( Show 1 ~ Show
4 )
Color/Gobo
selection
1. Hold on for
gobo change.
2. Press shortly
for color
change.
X/Y moving setting
1.Pan position
2.Tilt position
3.Dimmer
First set Master unit, then set Slave units’
position.
Mode
Sound 1
(LED off )
Sound 2
(LED normal
blinking)
Slow/Sound 3
(LED on)
Position/ Latch
(LED fast blinking)